Mô tả
HYG CNC Beam Saw HS-330H Purpose：
The CNC panel saw/beam saw HS-330H with a double pusher (the size of the cut package is 3100*3300 mm) is designed for cutting a package of board materials (chipboard, MDF, fiberboard, etc.), both lined and unlined. The machine is used in the conditions of large-scale and mass production for the manufacture of cabinet furniture, furniture panels, molded products.
Processing scheme：
HYG CNC Beam Saw HS-330H Distinctive features：
- 2 independent pushers for cutting panels with different lengths, improve cutting efficiency at different sizes.
- Grooving function;
- Polished steel plates in the cutting area.
- Work with optimizer programs that allow you to program the cutting order, print labels and import files with cutting maps.
- The maximum height of the opened package is 90 mm.
- The movement of the saw carriage occurs due to a spur rack and gear using a servomotor. Accuracy-Speed-Durability, three main parameters, according to which it was decided to complete our machine with these rails.
- The minimum cut size is 34×45 mm.
- Saw carriage travel speed up to 95 m/min.
- Saw carriage idle speed up to 120 m/min.
- The speed of the programmable pusher is 95 m/min.
- The working table of the machine is equipped with a blowing system (air cushion).
- The industrial computer ensures the reliable operation of the CNC system.
- Automatic lifting of the main saw to the required height depending on the thickness of the material being cut.
- Automatic determination of the length of the cut.
- Quick tool change system.
- The programmable pusher is equipped with eight pneumatic two-finger grippers.
- Servo adjustment for lifting/lowering the main saw.
2 independent pushers
2 independent pushers for cutting panels with different lengths, improve cutting efficiency at different sizes.
Cutting two different sizes
The machine can carry out simultaneous cutting of two blanks of different sizes.
Grooving function
Raising the main saw is carried out by a servo drive, due to which a high accuracy of the cutting height is achieved when grooving.
CNC system based on industrial PC
An industrial computer based on Windows 10 ensures reliable operation of the CNC system.
Powerful bed
The machine bed was developed taking into account CAD programs, where the maximum allowable loads and requirements for the machine design were calculated and simulated. The welded frame is tempered to relieve all internal stresses in the material, then processing takes place on a five-axis metalworking machine, where all platforms and holes for mounting components and assemblies are milled.
Batch cutting optimizer
Ability to work with all popular programs for optimizing cutting charts and printing labels.
Quick start of cutting
Longitudinal lever for switching on/off the cutting cycle.
Serving tables
The infeed worktables are equipped with an air cushion system to facilitate the positioning of workpieces.
Air cushion in the cutting area
The cutting area is equipped with tables with polished steel plates with an air cushion, which significantly facilitates work with small parts and protects them from damage.
Main and scoring saw motors
Separate motors for main and scoring saw. Servo adjustment for lifting/lowering the main saw.
Positioning the saw and pressure beam
Automatic adjustment of the height of the main saw and the departure of the pressure beam according to the height of the package being cut.
Pressure beam
The force of the clamping beam is controlled by the system and corresponds to the thickness or height of the stack cutting. Equipped with an injury protection system.
Saw carriage movement servomotor
The movement of the saw carriage occurs due to a spur rack and gear using a servomotor. This ensures greater cutting accuracy up to +-0.1 mm.
Side aligner
The side aligner accurately positions narrow strips along the side ruler when cutting them into finished parts.
Programmable pusher
The programmable pusher is equipped with eight two-finger pneumatic grippers, which guarantees a secure fixation of the workpiece package.
Two-finger pneumatic grippers
The special design of the grippers does not damage the material during its fixation and movement.
Flexible cable channel
Flexible and durable cable channel provides stable and fast movement of the pusher with pneumatic grips.
Quality electronic components
All HYG CNC panel saw’s Electrical components comply with CE standards.
Batch cutting - 90 mm
Height of package cutting – 90 mm. Possibility to cut 5 18 mm chipboard boards.
Minimum size
The minimum workpiece size is 34×45 mm.
OUR CERTIFICATES
| Name： | Specification： |
|---|---|
| Model | HYG CNC Beam Saw HS-330H |
| Positioning Accuracy | ±0.02 mm |
| Sawing Accuracy | ±0.15 mm |
| Maximum cutting length | 3300 mm |
| Maximum cutting width | 3300 mm |
| Maximum cutting thickness | 120 mm |
| Feeding/Sawing speed | 0-100 M/min |
| Saw carriage return speed | 0-120 M/min |
| Main saw diameter | 400-450/70 mm |
| Main saw speed | 4100 r/min |
| Scoring saw diameter | 200/50 mm |
| Scoring saw speed | 6200 r/min |
| Total Installed power | 40 kw |
| Main saw drive power | 18.5 kw |
| Scoring saw drive power | 2.2 kw |
| Saw carriage traction motor power | 2.0 kw |
| Small saw motor power | 1.5 kw |
| Manipulator Servo Motor | 2.0 kw |
| Centrifugal fan | 3.0 kw |
| Pneumatic system working pressure | 0.6-0.8 MPA |
| Overall dimensions LxWxH | 5600*6500*2100 mm |
| Loading dimension | 9800×9015*2100 mm |
| Weight of machine | 6500 kg |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
Tips on getting accurate quotes from suppliers.
Please include the following in your inquiry:
1. Personal or business information
2. Provide product request in great detail
3. Inquiry for MOQ, Unit Price, etc