Descrição
Automatic Bevel and Straight Integrated Edge Banding Machine (Model HE-768)
Perfecting both the Angle and the Vertical Edge. The HYG HE-768 takes handle-less door production to the next level. Unlike entry-level bevel machines that focus primarily on the slope, this Integrated Edge Bander dedicates equal precision to the straight edge section of the profile.
Built on a robust 7100mm chassis, the HE-768 features an advanced Six-Wheel Pressing System and distinct trimming stations for both geometry faces. This ensures that complex “Shark Nose” or “Finger Pull” profiles are not just shaped, but finished to a furniture-grade standard on every millimeter of the edge.
Advanced Technologies for J-Pull Profiles
1. Six-Wheel “Bevel + Straight” Pressing
The most critical challenge in bevel banding is adhesion at the fold. The HE-768 solves this with a specialized Six-Wheel Pressing Unit.
Simultaneous Pressure: Unlike standard rollers, this unit engages Bevel Pressure Wheels and Straight Pressure Wheels at the same time within the same device.
The Benefit: It forces the edge band to conform tightly to both the 45° slope and the straight vertical lip simultaneously, eliminating air gaps and ensuring a bond that lasts for decades.
2. Automatic Tape Grooving (Anti-Crack)
Folding a stiff edge band requires precision. The machine includes a Tape Grooving Device before the gluing station.
Function: It precisely scores the back of the PVC/Acrylic tape at the folding point. This allows the band to bend effortlessly around the sharp angle, preventing the common issues of “whitening” (stress marks) or edge cracking.
3. Dual Trimming & Scraping Stations
The HE-768 separates the finishing process for maximum quality:
Straight Trimming & Scraping: Dedicated units clean and radius the vertical edge.
Bevel Trimming & Scraping: Separate units specifically target the angled face.
Result: A fully finished profile where the transition between the slope and the straight edge is seamless and smooth to the touch.
4. Industrial Powerhouse (24.25 KW)
Processing complex shapes at speed requires immense stability. The HE-768 is equipped with a Total Power of 24.25 KW. This drives the forming motors and the 16-step workflow consistently at speeds up to 18 m/min, significantly faster than standard bevel machines.
The Complete 16-Step Integrated Workflow
The HE-768 leaves no surface untouched:
Bevel Forming: Mills the board edge to shape.
Bevel Gluing: Applies glue to the slope.
Heating Lamp 1: Preheats the slope.
Side Grooving: Scores the tape for folding.
Straight Gluing: Applies glue to the vertical edge.
Heating Lamp 2: Preheats the straight edge.
Bevel Edge Pressing: Applies pressure to the angle.
Straight Edge Pressing: Applies pressure to the vertical.
(Note: Step 7 & 8 work in tandem via the 6-wheel system)
Straight Edge Trimming: Refines the vertical lip.
Bevel Edge Trimming: Refines the angled slope.
End Cutting: Flush cuts front/rear.
Bevel Edge Scraping: Smooths the slope.
Straight Edge Scraping: Smooths the vertical lip.
Cleaning: Removes residue.
Buffing 1: Initial polish.
Buffing 2: Final high-gloss finish.
Technical Specifications
| Parameter | Specification |
| Model | HE-768 (Integrated Bevel Series) |
| Machine Dimensions | 7100 * 750 * 1600 mm |
| Total Power | 24.25 KW (High Torque) |
| Feed Rate | 10 – 18 m/min |
| Panel Thickness | 12 – 25 mm |
| Tape Thickness (Straight) | 0.4 – 3 mm |
| Tape Thickness (Bevel) | 1.0 – 2.0 mm |
| Min Panel Length | ≥ 120 mm |
| Min Panel Width | ≥ 150 mm |
| Working Pressure | 0.7 Mpa |
Ideal Applications
High-End Kitchen Cabinetry: Producing “Shark Nose” handle-less doors with perfect continuity between the angled grip and the door face.
Seamless Drawer Fronts: Where the top edge is beveled for grip, but the side edges remain straight (machine can handle both profile types).
Luxury Wardrobe Doors: Full-length beveled handles that require a consistent finish over 2 meters.
Expert Comparison: HE-765 vs. HE-768
| Feature | HE-765 (Entry Bevel) | HE-768 (Integrated Bevel) |
| Machine Length | 5.1 meters | 7.1 meters |
| Trimming Units | Single (Bevel) | Dual (Bevel + Straight) |
| Scraping Units | Single (Bevel) | Dual (Bevel + Straight) |
| Pressing System | Standard | 6-Wheel Simultaneous |
| Max Speed | 15 m/min | 18 m/min |
| Best For | Standard J-Pull | High-Precision / High-Volume J-Pull |
Gluing and pressing
The glue line is slight and the edge band does not run off.
End Cutting
Fast and stable, without bumping the board.
Rough Trimming
The rough trimming knife removes excess edge banding strips to form rounded corners, making the trimming nicer.
Fine Trimming
Fine trimming is to repair the board more carefully on the basis of rough trimming, so as to make the board nicer.
Chamfering
The four corners after the edge banding are trimmed into a small arc to make it smoother and not stab your hands.
Scraping
The super-hard alloy R knife scrapes the fine lines of the edge strip to make it smooth.
Buffing
The cloth wheel quickly polishes the edge of the edge strip, and the polishing wheel has a larger use area and better polishing effect.
OUR CERTIFICATES
Technical Specifications
| Parameter | Specification |
| Model | HE-768 (Integrated Bevel Series) |
| Machine Dimensions | 7100 * 750 * 1600 mm |
| Total Power | 24.25 KW (High Torque) |
| Feed Rate | 10 – 18 m/min |
| Panel Thickness | 12 – 25 mm |
| Tape Thickness (Straight) | 0.4 – 3 mm |
| Tape Thickness (Bevel) | 1.0 – 2.0 mm |
| Min Panel Length | ≥ 120 mm |
| Min Panel Width | ≥ 150 mm |
| Working Pressure | 0.7 Mpa |
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.
Tips on getting accurate quotes from suppliers.
Please include the following in your inquiry:
1. Personal or business information
2. Provide product request in great detail
3. Inquiry for MOQ, Unit Price, etc